ISO 13485:2016 Certified
40+ Years of Excellence
600+ Products
Download Catalog
MANUFACTURER & SUPPLIER | B2B LAPAROSCOPIC INSTRUMENTS

Laparoscopic Myoma Screw
Manufacturer in India

Bharat Surgical manufactures and supplies reusable laparoscopic myoma screws in 5 mm and 10 mm diameters for gynecological and laparoscopic procedures. The published range includes a standard laparoscopic myoma screw and a plain 5 mm model with a single-point threaded tip, rod handle and 330 mm length. Hospitals, gynecology departments, surgical centres, medical-equipment dealers and distributors can request model-specific specifications, current pricing, bulk quantities and delivery information.

Request B2B Quotation Send Requirement List
ISO 13485:2016 Certified
40+ Years Experience
Mumbai Warehousing
Laparoscopic Myoma Screw Manufacturer in India
Product Overview

What Is a Laparoscopic Myoma Screw?

A laparoscopic myoma screw is a reusable gynecological instrument with a threaded distal tip designed to engage and manipulate fibroid tissue during laparoscopic myomectomy procedures.

The screw tip provides a mechanical holding point, while the long shaft allows the surgeon to control the instrument through a compatible laparoscopic access port. Product selection depends on the shaft diameter, working length, tip design, handle configuration, trocar compatibility and the surgeon’s requirement.

Clinical Notice & Safety Guidance

This page supports product evaluation and procurement. It does not provide instructions for performing a surgical procedure.

BSC Product Range

Bharat Surgical Myoma Screw Range

Product variant Diameter Length
Laparoscopic Myoma Screw 5 mm and 10 mm 330 mm listed
Plain Myoma Screw 5 mm 330 mm

Bharat Surgical’s main product listing separately identifies a 5/10 mm stainless-steel laparoscopic myoma screw. The current gynecology range provides additional dimensional and handle information for the laparoscopic and plain myoma screw models.

Exact dimensions, material grade, tip geometry and handle finish should be confirmed against the current product code before placing an order.

Specifications

Published Technical Specifications

Specification Published information
Product name Laparoscopic Myoma Screw
Instrument category Laparoscopic gynecology instrument
Tip type Single point
Tip profile Threaded screw tip
Available diameter 5 mm and 10 mm
Plain model diameter 5 mm
Published length 330 mm
Handle type Rod handle
Material Stainless steel
Surface finish Polished or model-specific
Usage type Reusable
Published sterilization description Autoclavable
Application Laparoscopic myomectomy and fibroid manipulation
Quantity per pack One on the standard listing
Brand Bharat Surgical
Country of origin India
Sterile supply status Confirm before ordering
Material grade Confirm from current technical documentation

One published listing shows inconsistent stainless-steel grade information. The material grade should therefore not be entered into a hospital tender or purchase order until Bharat Surgical provides written confirmation for the selected model.

Product Comparison

5 mm vs 10 mm Myoma Screw

Selection factor 5 mm Myoma Screw 10 mm Myoma Screw
Published availability Standard and plain variants Standard variant
Required access port Compatible 5 mm or larger port, subject to actual instrument dimensions Compatible 10 mm or larger port, subject to actual instrument dimensions
Published length 330 mm on selected listing Confirm for selected model
Tip type Single-point threaded tip Confirm exact tip geometry
Handle Rod handle on selected listing Confirm selected configuration
Selection basis Port plan, surgeon preference and required instrument profile Port plan, surgeon preference and required instrument profile

The instrument’s nominal diameter should not be the only selection criterion. The procurement team must also verify the maximum external diameter, working length and trocar or cannula compatibility.

Product Comparison

Standard vs Plain Myoma Screw

Feature Standard Laparoscopic Myoma Screw Plain 5 mm Myoma Screw
Published diameter 5 mm and 10 mm 5 mm
Published length 330 mm on detailed listing 330 mm
Tip Single-point threaded tip Single-point threaded tip
Handle Rod handle Rod handle
Material Stainless steel Stainless steel
Pattern Model-specific Plain
Reusability Reusable Reusable
Minimum published pack quantity One piece Two pieces on the current listing

The exact construction difference between the standard and plain models should be confirmed through product drawings or physical samples. Buyers should not assume that the word “plain” defines a different surgical indication.

System Components

Main Components of a Myoma Screw

A reusable laparoscopic myoma screw generally includes:

Threaded distal tip

Long working shaft

Shaft-to-handle junction

Rod-style or model-specific handle

Product identification or size marking

Surface finish suitable for the intended reprocessing method

Procurement Notice: For procurement, request a dimensioned product image showing the overall length, working length, shaft diameter, maximum tip diameter and handle dimensions.

Selection Guide

Myoma Screw Selection Checklist

Before requesting a quotation, specify:

Required diameter: 5 mm or 10 mm
Standard or plain model
Required overall and working length
Trocar or cannula internal diameter
Preferred handle type
Required tip profile
Reusable instrument requirement
Hospital CSSD sterilization method
Material-grade documentation requirement
Sterile or non-sterile supply requirement
Required quantity
Delivery location
Tender, institutional or dealer enquiry
Sample requirement, if applicable
Myoma Screw Details

Trocar Compatibility

The myoma screw must pass through the intended trocar or access port without damaging the instrument or the trocar valve.

Confirm:

Nominal instrument diameter
Maximum external diameter
Distal screw-tip diameter
Trocar internal working diameter
Reducer requirement
Valve and seal compatibility
Instrument shaft length
Handle clearance

A 5 mm product name does not automatically confirm compatibility with every 5 mm trocar. Manufacturing tolerances, tip diameter and trocar-valve design can affect compatibility.

Product Comparison

Myoma Screw vs Laparoscopic Grasper

Selection factor Myoma Screw Laparoscopic Grasper
Distal design Threaded screw tip Opposing jaws
Holding mechanism Threaded engagement Jaw compression
Typical procurement category Gynecology or laparoscopic myomectomy instrument General laparoscopic hand instrument
Available published size 5 mm and 10 mm Model-specific
Primary selection factors Thread geometry, diameter, length and handle Jaw profile, action, diameter, length and handle
Interchangeability Not a direct substitute for every grasper Not a direct substitute for a myoma screw

The instrument should be selected by the operating surgeon according to the procedure and approved clinical protocol.

Product Comparison

Myoma Screw vs Uterine Manipulator

A myoma screw and a uterine manipulator perform different mechanical functions and should be listed separately in a hospital BOQ.

Feature Myoma Screw Uterine Manipulator
Working end Threaded screw tip Model-specific uterine manipulation assembly
Access route Laparoscopic port Model- and procedure-specific
Main procurement purpose Fibroid engagement and manipulation Uterine positioning or manipulation
Published size 5 mm and 10 mm Depends on manipulator model
Typical accessories Compatible trocar or reducer Tips, cups, injectors or accessories depending on model
Myoma Screw Details

Material and Finish Requirements

Bharat Surgical lists stainless steel as the material for its myoma screw range. Before institutional procurement, confirm:

Exact stainless-steel grade
Surface-finish specification
Passivation status, where applicable
Material certificate availability
Resistance to the validated cleaning chemistry
Marking and traceability
Repair or replacement policy
Recommended service life or reuse limitations

Do not describe the product as “rust-proof” or universally corrosion-proof. Reusable stainless-steel instruments can develop staining, pitting or corrosion when exposed to unsuitable chemicals, poor water quality, retained contamination or improper drying.

Cleaning & Care

Inspection Before Reprocessing and Use

Reprocessing Care Guidelines

Reusable myoma screws should be inspected according to the product instructions and hospital policy.

Inspect:

An instrument with a bent shaft, damaged screw threads, loose handle, cracked component or visible corrosion should be removed from service and assessed by qualified personnel.

Reprocessing Checklist
Screw tip for bending, flattening or damaged threads
Distal point for deformation
Shaft for bending or dents
Handle for looseness or cracks
Shaft-to-handle joint for movement
Surface for corrosion, pitting or discoloration
Crevices and threads for retained contamination
Instrument markings for readability
Overall alignment
Compatibility with the intended trocar
Cleaning & Care

Cleaning and Sterilization Considerations

Reprocessing Care Guidelines

The threaded tip requires careful cleaning because material can remain between its grooves. Reprocessing must follow the current product instructions and the hospital’s validated CSSD procedure.

General considerations include:

“Autoclavable” should not be treated as a complete sterilization instruction. The validated temperature, exposure time, pressure, drying cycle and packaging requirements must be obtained from the product-specific documentation.

Reprocessing Checklist
Begin cleaning within the period specified by the IFU.
Prevent contamination from drying on the screw threads.
Use suitable brushes and cleaning accessories for the threaded tip.
Avoid cleaning tools that may damage the point or surface.
Use cleaning agents compatible with the instrument material.
Rinse according to the validated procedure.
Inspect the threads under adequate lighting.
Dry the instrument completely before packaging.
Protect the sharp distal tip during handling and sterilization.
Use only the approved sterilization method and cycle parameters.
Maintain reprocessing and traceability records where required.
B2B Supply Channels

For Hospitals and Gynecology Departments

Bharat Surgical can support enquiries for:

Laparoscopic gynecology instrument sets
Myomectomy instrument requirements
Replacement of worn or damaged myoma screws
New operating-theatre procurement
Departmental standardization
Hospital rate contracts
Tender and institutional purchases
Medical college and training-centre requirements
Multi-location hospital procurement
Product evaluation and sample requests, subject to availability

Hospital teams should request the current product code, technical sheet, material confirmation and reprocessing instructions before approval.

B2B Supply Channels

For Dealers and Distributors

Medical-equipment dealers, importers and distributors can enquire about:

Dealer and bulk pricing
Mixed laparoscopic instrument orders
Standard and plain variants
Product photographs and catalogue data
Export packaging information
OEM or private-label availability, where offered
Minimum order quantities
Commercial lead time
Distributor or territory discussions
Shipping documentation

Availability, commercial terms, packaging and minimum quantities are subject to written confirmation.

B2B Supply Channels

Suggested Hospital BOQ Description

Suggested Tender/BOQ Text Template Copy for procurement document

"Reusable Laparoscopic Myoma Screw, [5 mm/10 mm] diameter, [required working length], stainless-steel construction, threaded single-point distal tip, compatible rod handle, suitable for validated hospital reprocessing, complete with product-specific IFU and technical documentation."

The final BOQ must be reviewed against the selected Bharat Surgical model. Do not copy unverified material grades or sterilization parameters into the tender.

BSC Product Range

Related Laparoscopic and Gynecology Products

Laparoscopic Trocar
Safety Trocar
Trocar Reducer
Port Closure Needle
Veress Needle
PCOD Needle
Aspiration Needle
Laparoscopic Graspers, Dissectors & Scissors
Laparoscopic Needle Holders
Uterine Manipulators
Dye Injector
Vaginal Tube & Vaginal Blocker
Hysteroscopy Instruments
Selection Guide

Why Choose Bharat Surgical?

5 mm and 10 mm myoma screw options
Standard and plain product variants
Reusable stainless-steel construction
Published 330 mm model
Single-point threaded-tip configuration
Supply support for hospitals and surgical centres
Dealer and bulk-order enquiries
Laparoscopic and gynecology instrument range
Indian manufacturing and supply base

All specifications must be confirmed against the selected product code and current technical documentation.

Immediate Answers

Frequently Asked Questions

Find technical, reprocessing, ordering, and size compatibility answers for the Bharat Surgical Myoma Screw range.

A laparoscopic myoma screw is a long-shaft reusable instrument with a threaded distal tip intended for fibroid engagement and manipulation during laparoscopic myomectomy.

It is intended for use during gynecological and laparoscopic myomectomy procedures. Its selection and clinical use must be determined by a qualified surgeon.

Bharat Surgical publishes 5 mm and 10 mm laparoscopic myoma screw options.

Yes. A reusable plain-pattern 5 mm model is listed with a single-point tip, rod handle and 330 mm length.

The detailed Bharat Surgical listing states a length of 330 mm for selected models.

Yes. The published standard and plain models are described as reusable.

The listed products are manufactured from stainless steel. The exact material grade should be confirmed for the selected model.

The published listing describes the instrument as autoclavable. Obtain the validated cycle parameters from the current product-specific IFU.

The detailed product listing describes a single-point threaded tip.

A rod handle is listed for the standard detailed model and the plain 5 mm model.

Their primary published difference is shaft diameter. Confirm their working length, maximum tip diameter, handle and exact thread design before selection.

Not necessarily. Check the actual instrument diameter, maximum tip diameter and the trocar’s internal working diameter and valve design.

It may be possible if the instrument, reducer and trocar dimensions are compatible. All three components must be verified.

No. A myoma screw has a threaded distal tip, while a laparoscopic grasper uses opposing jaws.

No. They have different working designs and procurement purposes and should be specified separately.

The published Bharat Surgical myoma screw is described as a mechanical stainless-steel instrument. No electrosurgical connection is listed.

Sterile supply status is not consistently published. Confirm whether the selected product is supplied sterile or non-sterile before ordering.

Inspect it for bent points, flattened or damaged threads, retained contamination, pitting and other visible defects.

It should be removed from service and assessed by qualified personnel. A bent shaft may affect alignment and trocar passage.

Follow the product-specific IFU and hospital procedure, using suitable cleaning accessories that reach between the threads without damaging them.

Use the protective method permitted by the IFU and CSSD procedure so the tip is not damaged and does not puncture the packaging.

Only when permitted by the product-specific reprocessing instructions. Do not assume that every reusable instrument supports the same cleaning method.

Use only the grade confirmed in Bharat Surgical’s current technical documentation. A published listing contains inconsistent grade information.

Hospitals may request a sample for technical evaluation, subject to Bharat Surgical’s availability and commercial policy.

Yes. Medical colleges and training institutions can enquire about individual instruments or laparoscopic training sets.

Hospitals, dealers and distributors can request quantity-based quotations.

Provide the diameter, length, tip preference, trocar size, required quantity, documentation needs and delivery location.

OEM or private-label availability must be discussed and confirmed directly for the required quantity and market.

Yes, subject to the required set configuration. Provide the full BOQ so every instrument can be quoted separately.

Request the current technical sheet, product code, IFU, material confirmation, reprocessing information, quotation and warranty or service terms.

Request Myoma Screw Price

Myoma screw pricing depends on: Published marketplace prices can become outdated and may refer to different models. Request a current written quotation based on the required dimensions, quantity and delivery location.
Factors Affecting Price: 5 mm or 10 mm diameter, Standard or plain configuration, Working length, Tip and thread design, Handle construction, Stainless-steel grade, Surface finish, Documentation requirement, Ordered quantity, Packaging, Domestic or export delivery, Taxes and freight

Request Quote Upload Photo or BOQ