ISO 13485:2016 Certified
40+ Years of Excellence
600+ Products
Download Catalog
MANUFACTURER & SUPPLIER | B2B GYNECOLOGY INSTRUMENTS

Hysteroscopy Operative Sheath
Manufacturer and Supplier in India

Bharat Surgical manufactures and supplies reusable hysteroscopy operative sheaths for hospitals, gynaecology departments, surgical centres, medical-equipment dealers and international distributors. Published products include brass clickline-type and stainless-steel Batuchi operative sheath configurations for compatible hysteroscopy systems. An operative sheath must match the telescope, working instruments, seals, fluid ports and locking mechanism of the selected system. Buyers should confirm the complete assembly instead of ordering only by telescope diameter or a general description such as “standard operative sheath.”

Request B2B Quotation Send Requirement List
ISO 13485:2016 Certified
40+ Years Experience
Mumbai Warehousing
Operative Sheath surgical instrument on a clean clinical blue background
Overview

What Is an Operative Sheath?

A hysteroscopy operative sheath is a system component designed to support visualisation, fluid circulation and the introduction of compatible working instruments.

Depending on its configuration, an operative hysteroscopy system may include:

Operative sheath
Hysteroscope or telescope
Obturator
Working channel
Instrument seal or cap
Inflow and outflow ports
Stopcocks
Compatible forceps, scissors or graspers
Compatible electrode
Camera head and coupler
Fibre-optic light cable
Fluid-management tubing

The sheath is only one component of the complete system. Its intended working instrument must fit the channel and seal while remaining compatible with the telescope and fluid arrangement.

System Matching Notice

An operative sheath must match the telescope, working instruments, seals, fluid ports and locking mechanism of the selected system. Buyers should confirm the complete assembly instead of ordering only by telescope diameter or a general description such as “standard operative sheath.”

Clinical selection and use must follow the applicable instructions for use and institutional protocols.

Product Range

Bharat Surgical Operative Sheath Range

Bharat Surgical publishes the following operative sheath descriptions:

Clickline-Type Batuchi Operative Sheath—Brass
Stainless-Steel Batuchi Operative Sheath
Batuchi Operative Sheath
Batuchi-Type Operative Sheath
Hysteroscopic Operative Batuchi Sheath
2.9 mm and 4 mm stainless-steel configurations

The published Stainless-Steel Batuchi Sheath is identified as an operative sheath for hysteroscopy and lists 2.9/4 mm sizes. Bharat Surgical also publishes a Clickline-Type Batuchi Operative Sheath in Brass. The available product names confirm these range categories, but the working-channel diameter, working length, ports, supplied accessories and exact telescope compatibility must be verified before publication or purchase.

Published Operative Sheath Configurations

Bharat Surgical configurationPublished informationDetails requiring confirmation
Stainless-steel Batuchi operative sheathHysteroscopy; 2.9/4 mm; stainless steelWorking length, channel, ports and locking interface
Clickline-type Batuchi operative sheathBrass construction; clickline typeTelescope size, channel and instrument connection
Batuchi operative sheathCategory listed by Bharat SurgicalMaterial, size, ports and supplied components
Hysteroscopic operative Batuchi sheathCategory listed by Bharat SurgicalComplete technical specification
Batuchi-type operative sheathCategory listed by Bharat SurgicalExact interface and compatibility

Only specifications verified in the current catalogue or quotation should be used for a particular product.

Sizing & Design

2.9 mm & 4 mm Sizing and Clickline-Type Sheaths

2.9 mm and 4 mm Operative Sheaths

Selection factor2.9 mm configuration4 mm configuration
Telescope categoryCompatible 2.9 mm telescope requiredCompatible 4 mm telescope required
Sheath profileConfirm for exact modelConfirm for exact model
Working-channel sizeConfirm in quotationConfirm in quotation
Working lengthConfirm in quotationConfirm in quotation
Instrument sizeMust match working channelMust match working channel
Locking mechanismModel-specificModel-specific
ObturatorMust match the exact sheathMust match the exact sheath
Fluid portsConfirm number and arrangementConfirm number and arrangement

The 2.9 mm or 4 mm specification generally identifies the telescope category. It should not automatically be treated as the sheath’s external diameter.

Clickline-Type Operative Sheath

Bharat Surgical publishes a brass clickline-type Batuchi operative sheath. “Clickline type” describes a particular working-instrument or connection arrangement, but it does not establish universal compatibility. Before ordering, verify:

Telescope brand and model
Telescope diameter
Telescope working length
Sheath working length
Working-channel diameter
Instrument insert diameter
Instrument insert length
Handle or connection type
Seal or cap requirement
Port arrangement
Obturator requirement

A clickline insert from one manufacturer or system should not be assumed to fit another sheath because the connectors look similar.

Comparisons & Matrix

Sheath Comparisons & Compatibility Matrix

Diagnostic Sheath vs Operative Sheath

FeatureDiagnostic sheathOperative sheath
Primary configurationExamination and fluid circulationVisualisation, fluid circulation and working instruments
Working channelMay not have an operative channelContains a defined operative arrangement
Compatible instrumentsNot automatically supportedRequired to match channel and connection
Seal or capModel-dependentImportant for the selected instrument size
ProfileModel-dependentMay have a different profile
Procurement detailsTelescope, ports and lockTelescope, channel, instruments, ports, seals and lock

A diagnostic sheath should not be treated as an operative sheath unless the manufacturer specifically identifies it for that use.

Operative Sheath vs Resectoscope Sheath

A hysteroscopy operative sheath and a TURP resectoscope inner–outer sheath are different products.

FeatureHysteroscopy operative sheathTURP resectoscope sheath
SystemHysteroscopeResectoscope
Working arrangementHysteroscopy instruments or compatible electrodesResectoscope working element and electrode
Published Bharat sizes2.9/4 mm telescope configurations26 Fr sheath published
AssemblyModel-specific operative sheathInner and outer sheath assembly
InterchangeabilityNot universalNot universal

Do not use one product as a substitute for the other based on appearance.

Operative Sheath vs Batuchi & Cystoscopy Sheaths

“Operative sheath” describes the product’s function, while “Batuchi sheath” refers to a recognised market category or design style. A Batuchi sheath may be identified as diagnostic, operative, 2.9 mm, 4 mm, brass, stainless steel, clickline type, or platform type. Therefore, buyers should record both the functional requirement and the exact sheath configuration.

An operative sheath is not the same as a cystoscopy sheath; their intended systems, working lengths, telescopes and connections may differ.

Operative Sheath Compatibility Matrix

ComponentInformation required before ordering
Operative sheathSize, working length, channel, ports and locking system
TelescopeBrand, model, diameter, angle and working length
ObturatorExact sheath size, profile, length and connection
Working instrumentDiameter, length, tip and handle connection
ElectrodeType, diameter, length, generator and system
Seal or capInstrument diameter and sheath model
Inflow portPosition, stopcock and tubing connector
Outflow portPosition, stopcock and tubing connector
Camera couplerTelescope eyepiece and camera-head interface
Light cableTelescope-side and light-source-side connectors
Fluid-management systemTubing, connector and validated limits
Sterilisation traySheath length and complete set contents
Instrument Integration

Working-Instrument & Energy Device Compatibility

Working-Instrument Compatibility

An operative sheath may be required to accept compatible:

Grasping forceps
Biopsy forceps
Scissors
Tenaculum-type instruments
Retrieval instruments
Monopolar electrodes
Bipolar electrodes
Other manufacturer-approved inserts

The product range above is illustrative of potential hysteroscopy instruments, not a claim that every instrument fits every Bharat Surgical operative sheath.

Confirm: instrument diameter, working length, tip or jaw design, handle connection, seal compatibility, electrical system where applicable, required channel clearance, and manufacturer-approved use.

Monopolar and Bipolar Instrument Compatibility

Bharat Surgical publishes separate hysteroscopy monopolar and bipolar electrode products. The presence of an operative channel does not mean that every electrode can be used through the sheath. For energy instruments, confirm:

Monopolar or bipolar system
Electrode diameter
Electrode working length
Working-element or handle compatibility
Sheath compatibility
Generator brand and model
Cable connection
Required irrigation medium
Insulation integrity
Manufacturer-approved operating configuration

Do not mix monopolar and bipolar components without written system confirmation.

Care & Quality

Materials, Reusable Status and Maintenance

Material Options & Reusable Status

Bharat Surgical publishes a stainless-steel operative Batuchi sheath and a brass clickline-type operative Batuchi sheath. For each quoted model, buyers should confirm exact material, stainless-steel grade where applicable, surface finish, materials used in seals and stopcocks, reprocessing compatibility, product identification, material declaration, and traceability documentation. Do not assume that the material of one operative-sheath variant applies to every product in the category.

Metal operative sheaths are generally procured as reusable instruments, but reusable status and delivered sterility must be confirmed separately:

Reusable: Designed for repeated use after validated reprocessing.
Sterile: Delivered in validated sterile packaging.
Non-sterile: Requires processing before first use.
Single-use: Intended for one use according to the product label.

If a reusable sheath is supplied non-sterile, it must be cleaned and sterilised according to its IFU before clinical use.

Cleaning, Disinfection and Sterilisation

Reusable operative sheaths can contain narrow channels, instrument seals, joints, ports and stopcocks. Thorough cleaning must precede the required sterilisation or disinfection process. The FDA describes reusable-device reprocessing as a detailed multistep process and highlights the need for validated instructions for devices with complex features and lumens. Refer to the FDA reusable-device reprocessing information and reprocessing validation guidance.

Begin point-of-use treatment as instructed
Prevent contamination from drying
Transport used instruments safely
Remove working instruments
Disassemble detachable components where directed
Open or remove stopcocks as instructed
Remove seals where the IFU requires it
Flush every channel and port
Brush lumens with the specified brush
Use approved detergent and water quality
Rinse internal and external surfaces
Dry all channels
Inspect for retained soil and corrosion
Reassemble and function-test
Package in a suitable sterilisation tray
Apply only the validated sterilisation method
Store processed instruments in protected conditions

Do not publish one universal autoclave temperature, exposure time or chemical concentration for all sheath components, seals and instruments.

Pre-Use Inspection Checklist

Correct product identity and size
Cleanliness and processed status
Bends, dents, cracks or corrosion
Distal-tip deformation
Rough or damaged surfaces
Clear working and irrigation channels
Secure stopcocks
Smooth stopcock movement
Leakage from ports or joints
Functional locking mechanism
Correct telescope seating
Correct obturator fit
Working-instrument passage
Seal condition
Instrument opening and closing
Electrode insulation, where applicable
Secure complete-system assembly — do not use any component if its cleanliness, integrity, alignment or compatibility is uncertain.

Maintenance and Storage

After reprocessing:

Keep matched system components identified
Store the sheath in a suitable tray
Protect the distal tip
Avoid placing heavy instruments over it
Prevent bending during transport
Protect stopcocks and locks
Maintain traceability
Inspect seals and moving parts regularly
Use an authorised repair process
Follow the facility’s sterile-storage policy

A bent, leaking or poorly locking sheath should be removed from service.

Procurement

Operative Sheath BOQ Template

BOQ itemSpecification to provideQuantity
Operative sheath2.9 or 4 mm telescope category___
Stainless-steel Batuchi sheathSize, channel and connection___
Brass clickline-type sheathTelescope and instrument interface___
ObturatorExact matching sheath model___
TelescopeDiameter, angle and working length___
Working forcepsDiameter, length and jaw type___
ScissorsDiameter, length and blade type___
Monopolar electrodeSize, length and generator system___
Bipolar electrodeSize, length and generator system___
Instrument seal or capSheath and instrument size___
Stopcock setPort and thread specification___
Fluid connectorPort and tubing specification___
Camera couplerTelescope and camera interface___
Light cableTelescope and source connectors___
Sterilisation trayDimensions and set contents___
Spare sheathExact model and quantity___
B2B Supply

Supply Channels, Export and Pricing Factors

For Hospitals and Gynaecology Centres

Hospitals may request:

2.9 mm operative sheaths
4 mm operative sheaths
Brass clickline-type sheaths
Stainless-steel Batuchi operative sheaths
Replacement sheaths
Matching obturators
Compatible working instruments
Backup sheaths and seals
Complete hysteroscopy set quotations
Tender-specific BOQs

The final configuration should be reviewed by the gynaecologist, biomedical team, CSSD and procurement department.

For Dealers and Distributors

Medical-equipment dealers and distributors can request:

Individual-product quotations
Bulk-order pricing
Current product photographs
Technical specifications
Replacement-product matching
Dealer packing
Tender documentation
Export packaging
Dealership discussions

MOQ, product availability and commercial terms should be confirmed in the current quotation.

Export Enquiries

International buyers should provide:

Destination country
Required sheath configuration
Telescope brand and model
2.9 mm or 4 mm telescope size
Working length
Working-channel requirement
Instrument interface
Brass or stainless-steel preference
Obturator requirement
Required instruments
Quantity
Sterile or non-sterile requirement
Packaging and language requirements
Requested regulatory documents
Delivery schedule

The importer must verify local registration, labelling and import requirements.

Operative Sheath Price

Operative sheath prices depend on:

2.9 mm or 4 mm configuration
Brass or stainless-steel construction
Clickline or other instrument interface
Working-channel dimensions
Working length
Ports and stopcocks
Obturator inclusion
Seals and caps
Working instruments
Individual product or complete set
Quantity
Packaging and documentation
Domestic or export delivery

For an accurate quotation, submit the telescope and working-instrument details with the required set contents.

Details Required for a Quotation

Please provide:

Buyer or hospital name
Delivery city and country
Telescope brand and model
Telescope diameter and angle
Telescope working length
Existing sheath reference
Working-channel requirement
Required instrument diameter and length
Clickline or other connection
Brass or stainless-steel requirement
Port configuration
Obturator requirement
Required quantity
Connection photographs
Tender or export documentation
Expected delivery date
Immediate Answers

Frequently Asked Questions

Technical, compatibility, ordering and reprocessing answers for the Bharat Surgical Operative Sheaths range.

It is a sheath designed to support a compatible telescope, fluid circulation and specified working instruments.

Yes. Bharat Surgical publishes brass clickline-type and stainless-steel Batuchi operative sheath configurations.

The stainless-steel Batuchi sheath listing identifies 2.9 mm and 4 mm telescope configurations.

Not necessarily. It generally refers to the compatible telescope category.

Bharat Surgical’s stainless-steel operative sheath listing includes a 2.9/4 mm size range.

Yes. Bharat Surgical publishes a brass clickline-type Batuchi operative sheath.

Yes. Bharat Surgical publishes a stainless-steel Batuchi operative sheath.

It is an operative hysteroscopy sheath identified by a Batuchi-type system design or interface.

It is a sheath with a particular working-instrument connection or arrangement. Exact compatibility must be verified.

No. Diameter, length, connector, seal and system design must match.

An operative sheath provides a defined working-instrument arrangement; a diagnostic sheath is primarily configured for examination and irrigation.

Only if its manufacturer specifically designs and approves it for the relevant instrument.

No. They belong to different endoscopic systems and have different assemblies.

No. Their intended systems, working lengths, telescopes and connections may differ.

Not unless the written quotation specifically includes it.

Inclusion varies. List it separately in the BOQ unless the quotation confirms it.

No such interchangeability should be assumed. The obturator must match the exact sheath.

Only instruments matching the sheath’s channel, working length, connection and approved use.

No. Channel size, length, handle, generator and complete-system compatibility must be confirmed.

Do not assume this. The complete sheath, electrode, handle, generator and fluid configuration must be approved.

Port configuration varies by model and must be confirmed.

Only the manufacturer’s specification can confirm the actual fluid-path arrangement.

Yes. The seal must match the sheath and working-instrument diameter and remain intact.

Remove it from use until the seal and complete assembly have been assessed and corrected.

Metal operative sheaths are generally reusable, but the product label and IFU must confirm this.

The delivered sterile or non-sterile condition must be confirmed for the quoted product.

Yes. Follow the validated cleaning and sterilisation instructions.

Do not assume this from the metal construction. Follow the product-specific reprocessing instructions.

Flush and brush it using the tools, detergent and method specified in the IFU.

Follow the exact IFU. Detachable components should be handled only as instructed.

Check cleanliness, straightness, channels, tip, ports, stopcocks, locks, seals, telescope fit and instrument passage.

No. Remove it from service and obtain an authorised assessment.

Photographs help, but measurements, telescope model, instrument details and original markings are also required.

Yes, subject to exact system identification and compatibility confirmation.

Yes. The BOQ may include the telescope, sheath, obturator, instruments, electrodes, light cable and accessories.

Yes. Pricing depends on configuration, quantity, packing and destination.

Export enquiries may be accepted subject to availability, documentation and destination-country requirements.

Send the telescope, sheath, working-instrument and interface details with the required quantity and delivery location.

Medical and Procurement Disclaimer: Operative sheaths are intended for appropriately trained healthcare professionals using compatible hysteroscopy equipment and working instruments. This page provides general product and procurement information and is not a procedural guide. Sizes, working-channel dimensions, materials, supplied accessories, sterile status, reusable status, compatibility, certification and availability may vary. Confirm every specification through Bharat Surgical’s current written quotation, product label and instructions for use.

Request Operative Sheath Price

Operative sheath prices depend on 2.9 mm or 4 mm configuration, brass or stainless-steel construction, clickline or other instrument interface, working-channel dimensions, working length, ports and stopcocks, obturator inclusion, seals and caps, working instruments, individual product or complete set, quantity, packaging and documentation, and domestic or export delivery. For an accurate quotation, submit the telescope and working-instrument details with the required set contents.

Request Quote Upload Photo or BOQ